Door Removal and Reversal Instructions (continued)

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to bottom of freezer door.

2.Swing bottom of handle away from the door and slide handle straight up and off of dovetail button.

3. Remove screw and dovetail button and install on other side, using the same holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic nameplate frame from door. Remove nameplate from its frame, turn frame upside down and install in old handle holes. Insert magnetic nameplate into frame.

Self-Adhesive Nameplate Models: Use putty knife to gently peel off name plate from door and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over dovetail button, swing handle into an upright position and pull downward, locking it into place.

2. Secure bottom of handle with two screws removed earlier.

TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)

In some models, the refrigerator door has a full length trim piece which continues from the bottom of the handle to the bottom of the door. The top of the trim fits around the base of the handle. An adhesive “trim lock” is positioned about halfway down. The bottom of the trim is held in place by either an adhesive trim lock, or a trim lock with two prongs inserted into a hole on the face of the door.

TO REMOVE TRIM:

1.Remove trim by gently pulling trim lock areas out and away from door.

2.When trim is free from door, slide the trim straight down and away from base of handle.

NOTE: For models with short handle trim, remove by sliding trim straight down and off of handle bracket.

TO REMOVE REFRIGERATOR HANDLE: (Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to top of refrigerator door.

2. Swing top of handle away from door and slide handle down and off of dovetail button.

3. Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

1. Start with handle offset away from door. Place bottom of handle over dovetail button, swing handle into an upright position and pull upward, locking it into place.

2. Secure top of handle with screws.

TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

NOTE: Trim lock must be removed and installed by sliding over the two donut shaped areas.

3. Install trim to handle by sliding under base of handle. Carefully align trim and press down at trim lock locations.

4.Use rubbing alcohol to remove any adhesive residue from old trim lock locations.

7

Page 6 Page 8
Page 7
Image 7
Electrolux 240435506 (0408) manual To Remove Freezer Handle, To Attach Freezer Handle, To Remove Trim, To Attach Trim
Page 6 Page 8

240435506 (0408) specifications

The Electrolux 240435506 (0408) is a high-performance vacuum cleaner designed to offer efficient cleaning solutions for households. This model is particularly notable for its advanced features and cutting-edge technologies, making it a popular choice among consumers seeking reliability and effectiveness in their cleaning appliances.

One of the standout features of the Electrolux 240435506 is its powerful suction capability. The vacuum is equipped with a robust motor that provides strong and consistent suction across various surfaces, including carpets, hardwood floors, and tiles. This ensures that dirt, dust, and debris are easily lifted, making cleaning tasks quicker and more efficient.

Another significant characteristic of this model is its lightweight design. Weighing in at just a fraction of heavier vacuum cleaners, the Electrolux 240435506 is easy to maneuver and transport, allowing users to effortlessly transition from room to room. This feature is especially beneficial for those with multi-level homes, as it minimizes strain while carrying the vacuum between floors.

The vacuum cleaner also comes with a range of attachments to enhance its versatility. These include a crevice tool for reaching tight spaces, a dusting brush for delicate surfaces, and an upholstery nozzle that works perfectly on furniture and car interiors. These tools make it easy to tackle any cleaning job, whether it’s a quick pick-up or a more thorough clean.

Furthermore, the Electrolux 240435506 features a HEPA filtration system. This state-of-the-art technology captures allergens and fine particles, making it an excellent choice for allergy sufferers and pet owners. The HEPA filter not only improves indoor air quality but also extends the lifespan of the vacuum by preventing dust and debris from accumulating in the motor and other components.

The design of the vacuum is user-friendly, featuring easy-to-use controls and a simple dust container that can be emptied with just one hand. This practical approach to design ensures that using the vacuum is a hassle-free experience.

In summary, the Electrolux 240435506 (0408) combines powerful suction, lightweight maneuverability, versatile attachments, and advanced filtration technology to provide a superior cleaning solution. Its focus on user convenience and efficiency makes it an ideal choice for anyone looking to maintain a clean and healthy home environment.
Top Page Image Contents