Electrolux 241978401 manual To level the cabinet using the front rollers select, Models

Installation 7

To level the cabinet using the front rollers (select	5 After unit is leveled, lower anti-tip leg until it
models):	contacts the floor.

1Remove the screw from each side of the toe grille (see illustration).

2Pull the toe grille forward and lift it off (see

illustration).

3Use a flat-blade screwdriver or ³⁄₈-inch socket wrench to raise or lower the front rollers.

4Ensure both doors are bind-free with their seals touching the cabinet on all four sides.

NOTE

The anti-tip leg must be in contact with the floor to keep the refrigerator stable. DO NOT use the anti-tip leg to level the refrigerator.

6Replace the toe grille by fitting it into place and replacing the screws.