Installation 9

4Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counter-clockwise (when viewed from the bottom).

2Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion.

Raising/Lowering Door

Adjusting Flipper Mullion Height

5 Re-tighten the set screw, ensuring it is between

3 Re-tighten set screw.

the spokes of the set washer. Set screw will not

 

be tight, just insert until it is flush with the hinge.

 

Set Screw

To adjust the flipper mullion:

1Loosen the set screw located on the flipper mullion hinge.

Adjusting Flipper Mullion Screw

Page 9
Image 9
Electrolux 241978401 manual To adjust the flipper mullion