Setting the delay timer
With the delay timer you can delay the start of a dishwashing cycle for
3hours.
1.Press the ON/OFF button.
2.Press delay timer button. The delay timer indicator is illuminated.
3.Select dishwashing cycle.
The programme display will light up.
4.Close the door.The dishwashing cycle will start automatically when
3hours have elapsed.
Cancelling the delay timer:
Press the delay timer button. The hours indicator goes out. The selected programme will begin immediately once the door is closed.
Switching Off the dishwasher
If the acoustic signal has been enabled, a continuous tone will sound for 15 seconds at the end of the dishwashing cycle.
If the dishwasher door is not opened, the acoustic signal sounds again after 3 and 6 minutes.
1 Carefully open the door. Hot steam may escape.
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result.
1.Press the ON/OFF button. All display indicators will go out.
2.Turn off the water tap.
Removing the Dishes
3 It is normal for the inner door and the dispensers to be damp.
•Empty the lower basket first, then the upper basket. This way you avoid dripping water from the upper basket onto dishes in the lower basket.
21