What to do if...
Remedying small malfunctions
If the acoustic signal is activated, warning tones sound if there are faults.
If while the appliance is operating indicators on the control panel flash or are lit up as described in the following table, please consult this to find out how to remedy the fault.
After remedying the fault that is flashing in the first or second rhythm in the programme progress display, press the button for the dishwashing cycle that had already started. The cycle will continue. In the case of other fault messages:
–Cancel the dishwashing cycle.
–Switch the appliance off and on again.
–Select dishwashing cycle.
If the fault is displayed again, please contact the Service Force Centre and inform them of the fault message.
Malfunction | Possible cause | Remedy |
| Tap is blocked with limes- | Check the tap and have it |
| cale or is faulty. | repaired, if necessary. |
|
|
|
1 short warning tone, | The tap is turned off. | Turn on the tap. |
continuously repeated, | The filter (where present) in | Clean the filter in the |
can be heard, | ||
the programme display for | the threaded hose fitting | threaded hose fitting. |
on the tap is blocked. | ||
the selected wash pro- |
|
|
gramme is flashing: |
| Cancel the dishwashing cy- |
the indicator for the end |
| cle (see chapter: Starting a |
of the wash programme is | Filters in the base of the | dishwashing cycle), |
flashing once | washing compartment are | clean filters (see chapter: |
continuously . | blocked. | Cleaning the filters), |
(problems with water in- |
| then start the dishwashing |
flow). |
| cycle again. |
| Water inflow hose has not | Check the position of the |
| been correctly positioned. | hose. |
|
|
|
25