Electrolux 40300 Installing the Dishwasher, Free-Standing Appliances, Cannot be kinked or crushed

Installation and Connection Instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted such that it is stable and level.

• To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing:

– use a screwdriver.

	• The drain hose, inlet hose and mains cable must be laid such that
	they are free to move in the rear of the plinth recess, so that they
	cannot be kinked or crushed.
	Free-Standing Appliances
1	• can be set up as stand-alone without additional installation.
	If the dishwasher is set up next to a gas or coal cooker, a heat-

insulating, non-flammable plate must be mounted between the dishwasher and the cooker, flush to the top edge of the work surface (depth 57.5 cm). The plate should have aluminium foil on the side facing the cooker.

29