Operating Instructions

Never place the dishwasher in operation if the mains cable, water inlet or drain hose is damaged; or the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible.

If the mains lead is damaged, or is to be replaced for a longer lead, the cable (obtainable from AEG Service Force) must be replaced by a service engineer authorised by AEG.

Never unplug the appliance by pulling on the cable, always pull the plug.

Additions or modifications to the dishwasher are not permitted for safety reasons.

Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

Long bladed knives stored in an upright position are a potential haz- ard.

Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.

When finished loading or unloading, close the door as an open door can be a hazard.

Correct Use

Only wash household dishes using the dishwasher. If the appliance is used for other purposes, or is used incorrectly, the manufacturer can- not accept any liability for any damage caused.

Only use detergents specifically designed for use in domestic dish- washers.

Do not put any solvents in the dishwasher. There is a risk of an explo- sion!

The anti-flood system provides dependable protection against dam- age due to leaks. For this system to function correctly, the following preconditions must be met:

The appliance must remain connected to the mains even when it is switched off.

The dishwasher must be correctly installed.

Always shut off the water supply at the tap when the dishwasher is not to be used for longer periods, e.g. when you are away on holiday.

Do not sit or stand on the open door, the appliance may tip over.

6

Page 6
Image 6
Electrolux 40300 manual Correct Use