Electrolux 45250Vi manual What to do if, Fault The programme will not start, Check

Instruction book

What to do if...

Before calling out an engineer, please check through the details below because some faults can be rectified easily without the need to call out an engineer.

Fault

The programme will not start.

Check

Is the door closed properly?

Have you pressed the On/Off button? Is the water tap turned on?

Is the dishwasher plugged in? Has the fuse blown?

Is the delayed start-button pressed in? Is the previous programme finished?

The dishwasher is not filling with water.

Is the water tap turned on?

Has your domestic water supply been cut off temporarily?

Is the water inlet hose kinked or blocked? Is the filter inside the inlet hose blocked? Is the water pressure too low?

Water not discharged at Did you open the door before the pro-

end of cycle.gramme cycle finished? Are the filters clogged?

Dishes not washed satis- Has anything prevented the spray arm

factorily.from rotating?

Are the spray arm holes clogged?

Were the dishes packed too close together?

Are the filters clogged?

Are the filters fitted correctly in place?

Did you use enough detergent?

Is the salt container cap properly closed?

Did you select a programme with too low temperature?

Is the rinse aid dispenser empty?

22