Position and connection instructions
Preparing the outer door
Screw the guide rods and hinges on the door into place using the predrilled holes.
Mount plate
Before installing the dishwasher and adjusting the door onto the cupboard, put the mount plate into its correct position on the shelf.
1. Place the mount plate in the middle of the cupboard. Mark the holes for screws and the holes for dis- mounting the outer door. There is a middle mark on the plate to help you.
2.Drill 4 holes with a diameter of
7mm. The door can be discon- nected if necessary, through hole
1(two holes).
3.Then screw the plate into place from underneath using the 2 screws provided, with the washers bet- ween.
4.Snap the hinges into the brackets on the mount plate.
The outer door should be supported underneath in order to prevent the hinges from breaking off.
5.Adjust the door to surrounding doors using screws A, B and C.
2x
4x
1 
1 
A B
C C
30
