Electrolux 45250Vi manual Water drainage

Models: 45250Vi

1 36
Download 36 pages 47.42 Kb
Page 34
Image 34
Water drainage

Position and connection instructions

Water drainage

To protect the dishwasher against water damage it is equipped with a water safety system. In the event of a fault the drainpump starts automatically and the remaining water inside the dishwasher is pumped out.

The water safety system also works when the dishwasher is switched off. However the dishwasher must be connected electrically.

The discharge hose must not at any point be higher up than 75 cm over the surface which the dishwasher is standing on. If it runs higher, operation of the dishwasher might be impaired. The hose should always be routed at the level which the dishwasher is standing on, rising up only where it meets the waste pipe. It is also important to ensure that the inside diameter of the hose is not less than 13 mm at any point.

34

Page 34
Image 34
Electrolux 45250Vi manual Water drainage