Electrolux 59840 user manual Setting long anti-crease function, Buzzer, Time

Daily use 17

Setting long anti-crease function

Press the LONG ANTI-CREASE button. A 90 minute anti-crease phase is set. The display now shows the LONG ANTI-CREASE icon

. If this additional function is selected, the anti-crease phase at the end of the drying cycle is lengthened by 60 minutes. The laun- dry can be removed at any time during the anti-crease phase.

Buzzer

The appliance is supplied with the BUZZER function deactivated.

To activate buzzer press BUZZER button.

The button is used to switch the function on or off. When the function is active, the BUZ- ZER symbol appears in the display.

The buzzer sounds or plays a tune during:

–cycle end

–anti-crease phase and when phase starts or ends

–cycle interruption by a warning

–alarm

Time

To select the programme duration after set- ting the TIME programme. You can select a programme duration from 10 mins to 3 hrs in 10-minute steps.

1. Turn the programme knob to the TIME programme. The blinking 10' above TIME button is on.

2.Press the TIME button repeatedly until the

desired programme duration is shown in the display, e.g. 20 for a programme of 20 minutes.