28What to do if ...
What to do if ...
Troubleshooting by yourself
If, during operation, the error code E... plus number or letter) appears on the LCD: Switch the machine off and on again. Reset programme. Press the START PAUSE button If the error is still displayed, please inform your local Service Force Centre and quote the error code.
Problem | Possible cause | Remedy | |
|
| Plug in at mains socket. Check | |
| Mains plug is not plugged in or | ||
| fuse is not working correctly. | fuse in fuse box (domestic in- | |
| stallation). | ||
|
| ||
Dryer does not work. | Loading door is open. | Close loading door. | |
| |||
| Have you pressed the START | Press the START PAUSE button | |
| PAUSE button? | again. | |
|
| Select a different programme | |
|
| ||
| Wrong programme selected. | the next time you dry (see “Pro- | |
|
| gramme chart” chapter). | |
| Lint filters clogged. | Clean lint filters. | |
| Fluff filter clogged. | Clean fluff filter. | |
|
| Observe recommended loading | |
| Overloading of laundry. | ||
| volumes. | ||
Drying results unsatisfactory. |
| ||
|
| ||
Ventilation slots in base area | Uncover ventilation slots in | ||
| |||
| covered up. | base area. | |
|
| Clean inside surface of drum | |
| Residue on inside surface of | and drum ribs. | |
| Make an adjustment using the | ||
| drum or drum ribs. | ||
| DRYNESS function (see chapter | ||
|
| ||
|
| ”Daily use”) | |
|
|
| |
| Fine strainer not in place and/ | Install fine strainer and/or snap | |
Loading door does not close. | or mesh filter not locked in | ||
large mesh filter into place. | |||
| place. | ||
|
| ||
|
|
| |
When a button is pressed, Err | Washing protection. After the | Turn the programme knob to | |
start of the programme, the | |||
appears on the LCD. | OFF. Set the programme again. | ||
option can no longer be set. | |||
|
| ||
|
|
| |
Drum light does not work. | Programme selector in OFF po- | Turn programme selector to | |
sition. | LIGHT or to any programme. | ||
| |||
|
|
|
