10.1 10.2 | Electrolux 63742 VI specification

12Control panel

Indicator pilot lights (10)

After having pressed the button 8, the WASHING pilot light (10.1) comes on.

When the pilot light 10.1 comes on this means that the machine is operating.

The DOOR pilot light (10.2) indicates if the door can be opened:

●light on: the door cannot be opened.

●light blinking: the door is opening.

●light off: the door can be opened.

10.1 10.2 10.3

When the appliance is performing additional rinses the EXTRA RINSE pilot light (10.3) comes on. To add an additional rinse, please see chapter «Select an additional rinse».

If your laundry is not removed during 10 minutes after the programme is finished, the backlight of the display switches off and the energy saving system will be enabled.

Only the button 8 pilot light is blinking to indicate that the appliance has to be switched off.

By pressing any buttons the appliance will come out from the energy saving status and you could set another washing programme or switch off the appliance.

Image 12

Electrolux 63742 VI manual 10.1 10.2

Contents

Lavamat 63742 Dear Customer Contents What to do if Technical Data Consumption value Installation Packaging materials Old machine Ecological hints Safety information Prior to using for the first timeGeneral safety Installation Child Safety Use Compartment for prewash phase or stain remover Product descriptionDetergent dispenser drawer Table of symbols Control panel Child safety lock 10.1 10.2 Acoustic signals Child safety lockFirst Use Personalisation Daily Use Load the laundryMeasure out the detergent and the fabric softener Pull out the dispenser drawer until it Machine is now switched on Programme option button Select the Prewash option ButtonSelect the Stain option Button Select the Sensitive option Button Select the Delay Start Button Select the Time option ButtonSelect the START/PAUSE Button Select an additional rinse Altering an option or a running programmeInterrupting a programme Cancelling a programme Opening the door after the programme has startedAt the end of the programme 10.2 go off and a blinking 0 will appear on the display Washing programmes Non-shrink shirtsBlouses Spin Programme information Temperatures Preparing the wash cycleSorting out the laundry Before loading the laundry Laundry weights Following weights are indicativeMaximum loads Removing stains Detergents and additives Quantity of detergent to be used Degrees of water hardnessPowder detergents for delicate fabrics 60C max and woollens Marked before starting the wash programme Care and cleaning Washing drum Door seal Drain pump Water inlet filter Emergency emptying out Frost precautions Possible cause/Solution What to do if Machine fills then empties immediately Cause possible/Solution Technical Data Consumption value Installation UnpackingPolystyrene base from the bottom Six smaller bolts C Positioning and levelling Water inlet Water-stop device Water drainage Onto a sink outlet spigot Interest of the environment Electrical connectionWith the following code Green and Yellow Earth Blue Permanent connection Preparation and assembly of the door Building-in Mounting the door Hardwood strip Environment concerns Packaging materialsOld machine Ecological hintsPage 132 963 770-01-302008 Subject to change without notice