Electrolux 63742 VI manual Building-in, Preparation and assembly of the door

Installation 43

Building-in

600

This appliance has been designed to be built into the kitchen furniture.

The recess should have the dimensions shown in picture A.

818 416 176,5

515

596

201

1 54

	600
		.
	min
0
60

820 min

A

	8	1
		95
		160
165		90
		490

When installing the appliance into the kitchen furniture ensure, if possible, the hoses are placed in either of the two recesses on the back of the appliance. This will help to pre- vent the hoses from becoming kinked or trapped.

Preparation and assembly of the door

The machine is originally pre-arranged for the assembly of a door opening from right to left.

In this case it is sufficient to screw in the hinges (1) and the counter-magnet (6) provided with the appliance, at the right level (Fig. B).

a) Door

The dimensions of the door should be:

- width 595-598 mm - thickness 16-22 mm

The height (C-Fig. C) depends on the height of the adjacent furniture's base.

b) Hinges

	6
1	2	7
1
		3

4

5

To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5-14 mm depending on the depth of door furniture) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm.

The distance (B) from upper edge of the door to the centre of the hole depends on the adjacent furniture's dimensions.

The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance.

B		23	8
35 Ø 12.5-14 depth
1
6
	-
		22	B

416 C

1,5

22+

	-598
C	595