Daily use 15
Adjusting the dosage of rinse aid
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maxi- mum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.
Daily use
•Check if it's necessary to refill with dishwasher salt or rinse aid.
•Load cutlery and dishes into the dishwasher.
•Fill with dishwasher detergent.
•Select a wash programme suitable for the cutlery and dishes.
•Start the wash programme.
Load cutlery and dishes
Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
•Before loading the dishes, you should:
–Remove all left over food and debris.
–Soften remnants of burnt food in pans
