Electrolux 65011 VI Select and start a washing programme, Check that the water tap is opened

24Select and start a washing programme

Programme

Degree of

Type of

Programme description

Consumption val-

soil

load

ues 1)

Prewash

Main wash

Intermediate rinse

Final rinse

Drying

Duration (minutes)

Energy (kWh)

Water (litres)

ECO 50°4)

Normal

Crockery

-150160

1,0- 1,1

12- 13

soil

and cutlery

Any

Partial load

12

0,1

4

(to be com-

pleted later

in the day)

5)

1)The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes.

2)During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C.

3)Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.

4)Test programme for test institutes.

5)This programme does not require the use of detergent

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings.

1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.

2.Check that the water tap is opened.

3.Press the On/Off button. The dishwasher must be in setting mode.