Electrolux 68000KF-BN operating instructions Cooking without the Automatic Heating-Up Function

Residual Heat Indicator

When an individual cooking zone or the entire hob is switched off, any residual heat is shown with an h (for

“Hot”) in the digital display for the appropriate cooking zones.

Even after the cooking zone has been switched off, the

residual heat indicator only goes out when the cooking zone is cold.

2 You can use the residual heat for melting and keeping food warm.

1 Important! As long as the residual heat indicator is illuminated, there is a risk of burns.

1 Important! If the power supply is interrupted the h symbol will also go out and information about residual heat will no longer be available. However, it is still possible to burn yourself. This can be avoided by tak- ing care around the hob.

Cooking without the Automatic Heating-Up Function

1.For heating up/browning, select a high power.

2.As soon as steam forms or the fat is hot, switch back to the required heat setting for the remainder of the cooking time.

3.Reset to zero in order to end cooking.

2 Note:

When cooking with the induction cooking zone you should take into account that

–the heating-up times are reduced by the direct energy transfer to the pan!

–the cooking process stops immediately after the cooking zone is switched off (no boiling over!)

23