Electrolux 7.05 Compact Probe failed, Probe missing, Checksum error, Rinse pump motor was shorted

Electrolux

EFS - Dishwashing Systems Platform

Electrolux Professional

Press the START and ENTER buttons together to display of the first Apex warning in progress. The possible Apex low level warnings are:

Probe failed:

ALr Prb FLt

The conductivity probe reading is outside the permissible reading range.

Probe missing:

ALr Prb MiS

The conductivity probe is disconnected.

Checksum error:

ALr CHS Err

There is no matching between the checksum saved in the APEX memory and that calculated by the firmware.

Rinse pump motor was shorted:

ALr Rin sHr

The rinse aid peristaltic pump motor is short-circuited.

Detergent manager on:

dEt MAn On

The Detergent manager function is operational.

Rinse manager on:

rin MAn On

The Rinse manager function is operational.

Below detergent set point:

BEL dEt SEt

The concentration of detergent in the tank is lower than the set point value.

Use the drain and de-lime buttons to scroll the low level warnings. When the last warning is reached, press the drain button to display the following read-only parameters:

Total dissolved solid:

tdS

This parameter displays the current total dissolved solids.

Detergent set point offset:

OtS

This parameter displays the conduttivity offset of the supply water.

Raw conductivity:

CrA

This parameter shows row (not temperature compensated) probe conductivity readings.

Compensated conductivity:

CAd

This parameter shows temperature compensated probe conductivity readings.

Wash temperature:

ttH

This parameter shows dish machine wash temperature readings (conductivity probe temperature sensor).

If there are no warnings in progress, the first read-only parameter appears when accessing the Apex data mode.

DOC. NO. 5956.677.00 P. 20 / 30