DOC. NO. 5956.677.00 P. 9 / 30
Electrolux
EFS - Dishwashing Systems Platform
Electrolux Professional
Press the confirm button (“C” -
(Figure 1)
) to access the first parameter of the
GENERIC FUNCTION
family.
Press the relief blue button (“D” -
(Figure 1)
) to display the
GENERIC FUNCTION
family again.
Use the drain and de-lime buttons to select the other parameters of the GENERIC FUNCTION family.
Press the confirm button to edit the selected parameter: the parameter value starts flashing.
Use the drain (to increase) and de-lime (to decrease) buttons to modify the parameter value. Press the confirm
button to save the new set value. Press the relief blue button to exit without saving the new setting.
The GENERIC FUNC. / GFu family parameters are described below:

Table 1: Drain cycle: Cleaning mode (ClM) = 0

Current value
Default value
Parame-
ter
namePa-
rameter
name
Display
visualiza-
tion
Family
Nr. Parameter
Nr. Parameter description Unit of
measure Min Max Factory set-
ting [for WT44]
Set
default
par.
spd 1 0 It allows all the parameters to be set to
their default value. The set parameters
are those of a WT44.
The parameter set to “Yes” (1)
automatically returns to “No” (0).
- No/ 0 Yes/
1No/
0
Speed nr.
1SP1 1 3 Indicates racks/hour processed at low
speed. racks/h 24 300 100
Speed nr.
2SP2 1 4 Indicates gear motor operation frequency
at speed 2. racks/h 24 300 200
Cleaning
mode ClM 18Selects the type of machine drain. If
the parameter is set to 0 the machine
carries out airgap and tank drain; if set
to 1 (default value) it carries out
sanitisation; if set to 2 it carries out the
drain and cleaning cycle.
-02 1
Phase Loads Event to evolve to the next
phase Phase dura-
tion [min,sec]Phase dura-
tion [sec] Tot al Tim e
[sec] Total T ime
[min,sec]
Wash tank
draining valve
Air gap load-
ing valve
Rinse pump
Prewash tank
draining valve
initial pause Fixed time (3 seconds) 0,03 3,00 3 0,03
load the air gap until the working level
is reached (to avoid pump cavitation) X
The air gap level is equal or higher
than the air gap working level
(parameter "Work lev. airgap") 0,00 0,00 3 0,03
drain the air gap X The air gap is completely emptying 1,00 60,00 63 1,03
empty completely the tanks X X Wash tank is completely emptying 1,18 78,00 141 2,21
spd 0 0