14
5. Once the required temperature has been set, after a short period
(approx. 5 sec.) the temperature display will change and again indicate
the current ACTUAL temperature inside the fridge. The display will
change from flashing to continuous illumination.
The compressor will start and then run automatically.
Information! When the setting is changed, the compressor does not
start immediately if automatic defrosting is currently taking place.
As the storage temperature within the fridge is reached quickly you
can store food immediately after switching on.
COOLMATIC

COOLMATIC Button

The COOLMATIC function is suited for quick cooling of
large quantities of goods in the refrigerator, e.g. drinks
and salads for a party.
1. The COOLMATIC function is switched on by pressing the COOLMATIC
button. The yellow light illuminates.
2. The COOLMATIC function now provides for intensive cooling. A
DESIRED temperature of +2°C is automatically selected. The COOL-
MATIC function is ended automatically after a period of 6 hours. The
originally selected DESIRED temperature is again valid. The temperature
display shows the ACTUAL refrigerator temperature.
3. The COOLMATIC function can be ended manually at any time by press-
ing the COOLMATIC button again. The yellow light goes out.
If the COOLMATIC function is switched on the temperature setting may
not be changed.
Malfunctions
If the electronics in the appliance have detected a fault that prevents
the ACTUAL temperature being measured, the temperature display will
flash. The appliance will continue to function using a backup pro-
gramme until your local Service Force engineer has repaired the appli-
ance.