Electrolux 70168 TK, 70170 TK

For correct operation this appliance must be

located in a dry atmosphere, away from

heat sources, e.g. cookers, radiators, boilers

and direct sunlight.

You should also ensure that air can circulate

freely around the back and the top of the

cabinet. There should be 100mm (4”)

between the top of the cabinet and any

overhanging kitchen furniture.

Alternatively allow 50mm (2”) between the

top of the cabinet and any overhanging kitchen furniture and a gap

of 25mm (1”) on either side of the appliance.

If your refrigerator is installed under

a continuous worktop, an air outlet

opening of at least 200 cm2and a

ventilation grille (A/B) matching the

worktop design should be installed at

the rear of the worktop.

The cut surfaces of the worktop (C)

should be varnished to avoid swelling

due to penetration of moisture.

The appliance wall distance must be

at least 30 mm and should be

checked before the ventilation grille is inserted.

Special accessories:

A Ventilation grille, brown B Ventilation grille, white.

Installation

AEG36

A/B

200 cm2

93-

The side at which the door opens can be changed from the right side

(as supplied) to the left side, if the installation site requires.

Warning! When changing the side at

which the door opens, the appliance

must not be connected to the mains.

Remove plug from the mains before-

hand.

☞1. Tilt the appliance slightly towards the

rear and prop it securely.

2. Unscrew the door hinge screws (K)

AEG97