Installation
9
and remove the hinge pin bracket (1).
3. Open the door a little way and take it
out downwards.
4. Unscrew the upper pin (A) and screw
it into place on the opposite side.
5. Fit the door into the upper pin (A) and
close it.
6. Screw the hinge pin bracket (1)
securely into place on the opposite
side using the screws (K).
7. Unscrew the handle and refit it on the
opposite side. Cover the holes left open
with the plugs contained in the documen-
tation pack.
A
EG98
A1
AEG75
Plug socket
The plug socket necessary for connection of your appliance to the
electricity supply should be positioned so that it is possible to pull out
the appliance plug.
If your appliance is installed under a
continuous worktop, the plug socket
should be provided as shown.
Alternatively a concealed spur socket
fitted with a 13 A fuse may be fitted.
If the socket is not accessible once the
appliance is built in, the electrical
installation must include suitable
means of isolating the appliance
from the mains (e.g. fuse, cut-out,
current trip or similar with a minimum contact separation of 3 mm).
The mains cable may only be changed by a qualified electrician or
competent person. If your appliance needs repairing, please contact
your local Service Force Centre.
130
300
AEG44