What to do if ...

20Symptom Possible Cause Remedy
Appliance does not work,
green stand-by display and
temperature display are
not lit.
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is defec-
tive
Socket is defective.
Mains malfunctions are to
be corrected by an
electrician.
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec-
essary.
Temperature is set too
cold.
Press „+“ (WARMER) but-
ton.
Appliance cools too much.
There is a malfunction.
Inform your local Service
Force Centre. Do not open
the door of the appliance
any more.
All the lights in the tem-
perature display are flash-
ing.
The food is too warm.
Temperature is not proper-
ly adjusted.
Please look in the “Starting
up and Temperatur regula-
tion” section.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Open the door only as long
as necessary.
Press COOLMATIC button.
Please look in the
“Installation location” section.
Light bulb is defective.
Interior lighting does not
work.
Please look in the “Changing
the light bulb” section.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not air tight
(possibly after reversing
the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.