Malfunction |
| Possible Cause |
| Remedy |
|
|
|
|
|
Appliance is not level.
The appliance is touching the wall or other objects.
Unusual noises.
A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the component out of the way.
The compressor does not start immediately after changing the temperature setting.
Water on the floor or on storage shelves.
This is normal, no error has occurred.
Water drain hole is blocked.
The compressor starts after a period of time.
See the "Cleaning and Care" section.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data:
1.To switch off the appliance, push the button (A).
2. Unplug the mains plug.
3. To change the light bulb press on the rear hook and at the same time slide the cover in the direction indicated by the arrow.
4.Change the defective light bulb with one of the some power (the maximum power is shown on the light diffuser).
5.Refit the light bulb cover.
6.Put the refrigerator back into operation.
19
