Rehingeing the door
The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance may not be connected to the mains. Remove plug from the mains beforehand.
Procced as follows:
To carry out the following operations, we suggest that this be done with another person that will keep a firm hold on the door of the appliance during the operations.
Gently lay the appliance on its back.
1. Remove the ventilation grille.
2. Remove the bottom hinge (A) by unscrewing the fixing screws.
3.Remove the door.
4.Unscrew the pin of the bottom
hinge (f) and refit it on the opposite side.
5.Unscrew the pin of the upper hinge
(d) and refit it on the opposite side.
6.Insert the door in the upper hinge and refit the upper hinges (A).
Pay attention that the border of the doors are parallel to the top border, otherwise adjust the position of the lower hinge of the door (A).
7.Remove from the ventilation grille the cover (e) and refit it on
the opposite side.
8.Refit ventilation grille.
24