Section 1 Introduction
All information in this publication represents data available at the time of print. Kohler Co. reserves the right to change this literature and the products represented without incurring obligation.
The safe and successful operation of a mobile power system depends primarily on the installation. Use this manual as a guide for installing the mobile generator set. Refer to the operation manual for operating instructions.
1.1 Installation Standards
Mobile generator set installations must comply with the Kohler detailed installation instructions following and state and local requirements.
The installer is responsible for improper installations resulting in penalties from noncompliance with California Air Resources Board (CARB) or Environmental Protection Agency (EPA) emission standards as well as state and local requirements.
1.3 Generator Set Operation
After the installer attaches the generator set to the vehicle’s frame and makes connections, do the following to make the generator set operational:
DAttach the exhaust system
DAdd radiator coolant
DAdd oil to the engine crankcase until the dipstick indicates full
DConnect the fuel inlet and fuel return lines (for gasoline models) or fuel inlet line (for LP models)
DConnect the remote switch, if equipped
DConnect the load leads
DConnect the battery terminals
1.2 Generator Set Specifications
Refer to the model’s specification sheet for details. Use the spec sheet as a guide for planning the installation. Use the current dimension drawing and wiring diagrams.
Introduction 1 |
