Kohler 10ERG, 15ERG, 13ERG manual Remote Connection, View B

Using a Separate Battery		View A
for the Generator Set
		-	+
	N
Battery	Vehicle Frame
Positive		12-Volt
		Battery
		View B
Using the Same Battery		Ground Strap
as the Vehicle Engine
		Vehicle Frame
		12-Volt
		Battery
	N	-	+
Battery	Vehicle	Battery Negative
Positive
	Frame	to Vehicle Frame

Figure 6-6 Battery Connection Details

6.6 Remote Connection

Kohler Co. offers several remote panels for connection to the generator set. Contact your local Kohlerr distributor/dealer for detailed descriptions. See Figure 6-7 for the location of the remote interface connection to the generator set junction box. Kohler Co. also offers wiring harnesses in various lengths with a connector keyed to the junction box connector. A “pigtail” harness is also offered which includes the appropriate connector on one end and has pigtails that the installer can use to connect to a customer-supplied start/stop switch or separate lights and hourmeter. Consult wiring diagrams, ADVs, and instruction sheets for connection information/details.

These models use a 12-pin connector for the remote interface connection. See Figure 6-7 for the connector’s location. See Figure 6-8 for the correct customer-supplied plug and pin part numbers.

Non-Service Side View	1
	GM34867C
1. Remote interface connector

Figure 6-7 Remote Interface Connector

Component	Amp Part No.	Kohler Part No.
Plug	350735-1	229998
Pin	350218-6	241618
Cable Seal	794280-1	GM29252
Interface Seal	794279-1	GM29507
Cavity Plug	770377-1	GM28769

Figure 6-8 Connector Components

Note: Gauge senders. Gauge senders are available for most generator sets. If using customer- supplied gauges, be sure they are compatible with generator set senders. Contact an authorized Kohlerr service distributor/dealer. Gauges and senders are available as service items from an authorized Kohlerr service distributor/dealer.

TP-6335 9/04 Electrical System 19