Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Installation

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

Troubleshooting Tips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4

Page 4
Image 4
GE 197D3351P003 installation instructions HOW to Connect Electricity, Troubleshooting Tips, Consumer Support

197D3351P003 specifications

The GE 197D3351P003 is a highly regarded component in the realm of electronic systems, particularly used in the aviation and aerospace industries. This product is a vital part of the engine control units (ECUs) that manage various critical functions of modern aircraft engines. Its design reflects advanced engineering principles aimed at ensuring reliability, efficiency, and adaptability.

One of the primary features of the GE 197D3351P003 is its exceptional durability. Built to withstand extreme environmental conditions, this component operates effectively in a wide range of temperatures, pressures, and vibrations. The rugged construction is essential for maintaining performance and safety in demanding aviation scenarios.

The technology incorporated in the GE 197D3351P003 is at the forefront of innovation. It uses advanced algorithms to process data quickly and accurately, allowing for real-time monitoring and control of engine parameters. This enables the engine to operate within optimal performance bounds, enhancing fuel efficiency and reducing emissions. The integration of modern software also means that updates and improvements can be implemented swiftly, keeping the system current with the latest advancements in aviation technology.

Another significant characteristic of this component is its modular design. This feature allows for easy integration into existing systems and facilitates maintenance and upgrades, which are crucial for managing the lifecycle of aircraft. The modularity also contributes to reducing downtime during servicing operations, a vital consideration in aviation where time is of the essence.

Furthermore, the GE 197D3351P003 is built with redundancy in mind. In aviation environments, the failure of any single component can have serious consequences. Therefore, this part incorporates multiple layers of backup systems to ensure continuous operation, even in the event of a malfunction. This focus on redundancy enhances the overall reliability of the aircraft, giving operators peace of mind.

In summary, the GE 197D3351P003 stands out due to its durability, advanced technology, modular design, and built-in redundancy. These features make it an essential component for contemporary aviation systems, contributing to safer, more efficient, and environmentally friendly aircraft operations. As technologies continue to evolve, the role of components like the GE 197D3351P003 will be critical in shaping the future of aerospace engineering.