Care and cleaning of the refrigerator.

www.GEAppliances.com

Safety

Dispenser drip area.

Cleaning the Outside

The dispenser drip area, (on some models) beneath the grille, should be wiped dry. Water left in this area may leave deposits. Remove the deposits by adding undiluted vinegar to the well. Soak until the deposits disappear or become loose enough to rinse away.

The dispenser cradle (on some models). Before cleaning, lock the dispenser by pressing and holding the LOCK CONTROL pad for 3 seconds. Clean with warm water and baking soda solution—about a tablespoon (15 ml) of baking soda to a quart (1 l) of water. Rinse thoroughly and wipe dry.

The door handles and trim. Clean with a cloth dampened with soapy water. Dry with a soft cloth.

Keep the outside clean. Wipe with a clean cloth lightly dampened with kitchen appliance wax or mild liquid dish detergent. Dry and polish with a clean, soft cloth.

Do not wipe the refrigerator with a soiled dish cloth or wet towel. These may leave a residue that can erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.

Instructions Operating Instructions

Cleaning the Inside

To help prevent odors, leave an open box of baking soda in the fresh food and freezer compartments.

Unplug the refrigerator before cleaning. If this is not practical, wring excess moisture out of sponge or cloth when cleaning around switches, lights or controls.

Use warm water and baking soda solution— about a tablespoon (15 ml) of baking soda to a quart (1 l) of water. This both cleans and neutralizes odors. Rinse and wipe dry.

After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets at the hinge side. This helps keep the gaskets from sticking and bending out of shape.

Drain opening in freezer compartment. During yearly cleaning, remove bottom freezer basket and flush a solution of baking soda—1 teaspoon (5 ml) and 2 cups (500 ml) of hot (not boiling) water— through the drain line with the help of a meat baster. This will help eliminate odor and reduce the likelihood of a clogged drain line. If drain becomes clogged, use a meat baster and baking soda solution to force the clog through the drain line.

Avoid cleaning cold glass shelves with hot water because the extreme temperature difference may cause them to break. Handle glass shelves carefully. Bumping tempered glass can cause it to shatter.

Do not wash any plastic refrigerator parts in the dishwasher.

Installation Instructions Troubleshooting

Condenser

There is no need for routine condenser cleaning in normal home operating environments. However, in environments that may be particularly dusty or greasy, the condenser should be cleaned periodically for efficient refrigerator operation.

Cleaning the condenser:

The condenser is located inside the back of the refrigerator. To access it, first unplug the refrigerator. Then remove the access cover. The condenser is on the right side.

Tips Consumer Support

11

Page 10 Page 12
Page 11
Image 11
GE 197D3351P003 Care and cleaning of the refrigerator, Tips Consumer Support, Cleaning the Outside, Cleaning the Inside
Page 10 Page 12

197D3351P003 specifications

The GE 197D3351P003 is a highly regarded component in the realm of electronic systems, particularly used in the aviation and aerospace industries. This product is a vital part of the engine control units (ECUs) that manage various critical functions of modern aircraft engines. Its design reflects advanced engineering principles aimed at ensuring reliability, efficiency, and adaptability.

One of the primary features of the GE 197D3351P003 is its exceptional durability. Built to withstand extreme environmental conditions, this component operates effectively in a wide range of temperatures, pressures, and vibrations. The rugged construction is essential for maintaining performance and safety in demanding aviation scenarios.

The technology incorporated in the GE 197D3351P003 is at the forefront of innovation. It uses advanced algorithms to process data quickly and accurately, allowing for real-time monitoring and control of engine parameters. This enables the engine to operate within optimal performance bounds, enhancing fuel efficiency and reducing emissions. The integration of modern software also means that updates and improvements can be implemented swiftly, keeping the system current with the latest advancements in aviation technology.

Another significant characteristic of this component is its modular design. This feature allows for easy integration into existing systems and facilitates maintenance and upgrades, which are crucial for managing the lifecycle of aircraft. The modularity also contributes to reducing downtime during servicing operations, a vital consideration in aviation where time is of the essence.

Furthermore, the GE 197D3351P003 is built with redundancy in mind. In aviation environments, the failure of any single component can have serious consequences. Therefore, this part incorporates multiple layers of backup systems to ensure continuous operation, even in the event of a malfunction. This focus on redundancy enhances the overall reliability of the aircraft, giving operators peace of mind.

In summary, the GE 197D3351P003 stands out due to its durability, advanced technology, modular design, and built-in redundancy. These features make it an essential component for contemporary aviation systems, contributing to safer, more efficient, and environmentally friendly aircraft operations. As technologies continue to evolve, the role of components like the GE 197D3351P003 will be critical in shaping the future of aerospace engineering.
Top Page Image Contents