Instructions

About the water filter cartridge.

On some models

Troubleshooting Tips Installation Instructions Operating Instructions Safety

Cartridge Holder

Place the top of the cartridge up inside the cartridge holder and slowly turn it to the right.

Filter Bypass Plug

(on some models)

Water Filter Cartridge

The water filter cartridge is located in the back upper right corner of the refrigerator compartment.

When to Replace the Filter on Models With a Replacement Indicator Light

There is a replacement indicator light for the water filter cartridge on the dispenser. This light will turn orange to tell you that you need to replace the filter soon.

The filter cartridge should be replaced when the replacement indicator light turns red or if the flow of water to the dispenser or icemaker decreases.

When to Replace the Filter on Models Without a Replacement Indicator Light

The filter cartridge should be replaced every six months or earlier if the flow of water to the water dispenser or icemaker decreases.

Installing the Filter Cartridge

If you are replacing the cartridge, first remove the old one by slowly turning it to the left. Do not pull down on the cartridge. A small amount of water may drip down.

On models without a replacement indicator light, apply the month and year sticker to the new cartridge to remind you to replace the filter in six

months.

Fill the replacement cartridge with water from the tap to allow for better flow from the dispenser immediately after installation.

Lining up the arrow on the cartridge and the cartridge holder, place the top of the new cartridge up inside the holder. Do not push it up into the holder.

Slowly turn it to the right until the filter cartridge stops. DO NOT OVERTIGHTEN. As you turn the cartridge, it will automatically raise itself into position. Cartridge will rotate about 1/2 turn.

Run water from the dispenser for 3 minutes (about one and a half gallons) to clear the system and prevent sputtering.

Press and hold the RESET WATER FILTER pad (on some models) on the dispenser for 3 seconds.

NOTE: A newly-installed water filter cartridge may cause water to spurt from the dispenser.

Filter Bypass Plug

You must use the filter bypass plug

when a replacement filter cartridge is not available. The dispenser and the icemaker will not operate without the filter or filter bypass plug.

Replacement Filters:

To order additional filter cartridges in the United States, visit our Website, www.GEAppliances.com, or call

GE Parts and Accessories, 800.626.2002.

GWF

Suggested Retail $34.95 USD.

Customers in Canada should consult the yellow pages for the nearest Camco Service Center.

About the shelves and bins.

Not all features are on all models.

Snugger

Bins on the Fresh Food Compartment Door

Consumer Support

6

Adjustable bins can easily be carried from refrigerator to work area.

To remove: Lift the front of the bin up, then pull out.

To replace or relocate: Engage the bin in the molded supports of the door, and push in. Bin will lock in place.

The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the divider near the rear and move it back and forth to fit your needs.

Page 5 Page 7
Page 6
Image 6
GE 197D3351P003 installation instructions About the water filter cartridge, About the shelves and bins, Instructions
Page 5 Page 7

197D3351P003 specifications

The GE 197D3351P003 is a highly regarded component in the realm of electronic systems, particularly used in the aviation and aerospace industries. This product is a vital part of the engine control units (ECUs) that manage various critical functions of modern aircraft engines. Its design reflects advanced engineering principles aimed at ensuring reliability, efficiency, and adaptability.

One of the primary features of the GE 197D3351P003 is its exceptional durability. Built to withstand extreme environmental conditions, this component operates effectively in a wide range of temperatures, pressures, and vibrations. The rugged construction is essential for maintaining performance and safety in demanding aviation scenarios.

The technology incorporated in the GE 197D3351P003 is at the forefront of innovation. It uses advanced algorithms to process data quickly and accurately, allowing for real-time monitoring and control of engine parameters. This enables the engine to operate within optimal performance bounds, enhancing fuel efficiency and reducing emissions. The integration of modern software also means that updates and improvements can be implemented swiftly, keeping the system current with the latest advancements in aviation technology.

Another significant characteristic of this component is its modular design. This feature allows for easy integration into existing systems and facilitates maintenance and upgrades, which are crucial for managing the lifecycle of aircraft. The modularity also contributes to reducing downtime during servicing operations, a vital consideration in aviation where time is of the essence.

Furthermore, the GE 197D3351P003 is built with redundancy in mind. In aviation environments, the failure of any single component can have serious consequences. Therefore, this part incorporates multiple layers of backup systems to ensure continuous operation, even in the event of a malfunction. This focus on redundancy enhances the overall reliability of the aircraft, giving operators peace of mind.

In summary, the GE 197D3351P003 stands out due to its durability, advanced technology, modular design, and built-in redundancy. These features make it an essential component for contemporary aviation systems, contributing to safer, more efficient, and environmentally friendly aircraft operations. As technologies continue to evolve, the role of components like the GE 197D3351P003 will be critical in shaping the future of aerospace engineering.
Top Page Image Contents