Buttons and Display
|
| Dust collector full | |
|
| Charger Found indicator | |
|
| Battery indicator | |
Stop | On/Off |
| |
Next | Yes | Current | |
vacuum | |||
|
| ||
|
| programme | |
|
| Message display |
Remaining time
Clocksymbol
Vacuuming Programmes
Normal. Timer: Auto | Quick. Timer: 10min | Spot |
Select programme? | Select programme? | Select programme? |
On/Off
Press the On/Off button for about one second to start and stop Trilobite.
Stop
The Stop button has two functions. Use it to cancel a command or to stop Trilobite during vacuuming.
Yes
Press the Yes button to confirm a setting shown on the display.
Next
Use the Next button to select items on the menu. Also use the Next button as a “No” button when you do not want to select a setting presented in the display.
Symbols
Information is shown in the display using status messages and also by symbols.
(The battery capacity symbol is shown on page 24.)
Normal | Quick | Spot | Timer |
vacuuming | vacuuming | vacuuming |
|
Battery | Charger found | Dust | Clocksymbol |
|
| collector full |
|
Normal vacuuming
When you start Trilobite it is ready to start vacuuming using the Normal pro- gramme and automatic time calculation.
1.(When Trilobite is switched off and on the floor or placed in the charger), press to
start.
2.Press to start vacuuming.
3.If you want to select another programme, press .
4.If you would like to change the vacuuming
programme, press (continue to “Quick vacuuming” or “Spot vacuuming”).
5.If instead you would like to change the time setting (this may be necessary when vacuuming floor surfaces of 40 m2 or more), press again and confirm by
pressing .
6.Use to display “On” and then confirm
by pressing .
7.Set the desired time by pressing and
then confirm with .
8.Press to commence vacuuming.
NOTE! Never start Normal vacuuming at distances under 0.5 m from a magnetic strip. Vacuuming can always be interrupted by
pressing . After this, pressing recommences vacuuming, while pressing
will call up the menu.
Quick vacuuming
The Quick programme is identical with Normal vacuuming except that wall mapping is not included.Vacuuming takes shorter time with the duration preset to 10 minutes, however, the vacuum result may be slightly inferior.
1.After you have switched on Trilobite, press
to change the programme and confirm
by pressing .
2.Use until “Quick” is displayed and
confirm by pressing .
3.If you don’t want to change the time setting, put Trilobite on the floor and start
vacuuming by pressing .
4.If instead you would like to change the time setting, press until “On” is
displayed and confirm by pressing .
5.Set the desired time by pressing and
then confirm with .
6.Put Trilobite on the floor and start
vacuuming by pressing .
NOTE! Vacuuming can always be interrup-
ted by pressing . After this, pressing
recommences vacuuming, while pressing will call up the menu.
Spot vacuuming
Use Spot vacuuming to quickly vacuum a limited area, e.g. if you have spilled something.The area to be vacuumed is approx. 1 m2 with Trilobite placed in the centre of the area.The area is vacuumed twice.
1.Switch on Trilobite, press to change the programme and confirm by pressing .
2.Use until “Spot” is displayed and
confirm by pressing .
3.Put Trilobite in the centre of the area to be vacuumed and start vacuuming by
pressing .
Do not under any circumstances vacuum liquids or lit or glowing objects, e.g. cigarette butts.
NOTE! Vacuuming can always be interrup-
ted by pressing . After this, pressing
recommences vacuuming, while pressing will call up the menu.
26 | 27 |