
Care & Cleaning 37
STARTING SELF-CLEAN CYCLE
A
To set the controls for a Self-Cleaning cycle:
1. Remove the oven racks and the racks supports. | Model B |
2. Be sure the clock is set with the correct time of day and the oven door is closed.
3. Press OVEN :![]()
to light up the available cooking modes pads.
4. Press CLEAN
.
5.Press LITE
for a 2 hour ![]()
for 3 hours, or press HEAVY ![]()
![]()
for 4 hours.
6.Press START
. The "DOOR
" icon will flash.
7.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR
" indicator light will stop
flashing and remain on.
Note: Allow about 15 seconds for the oven door lock to close.
To set the controls for a delayed Self-Cleaning cycle:
1.Follow the instructions above.
2.Press END TIME
. The time of day numbers will blink in the display.
3. Enter time of day needed for the end of the cycle (example for “6:00”; 6 0 0 ).
4. Press START
.
When the Self-Clean Cycle is Completed:
1.The time of day and "DOOR
" will remain ON.
2.The display will show an “Hot” message while the oven is still too hot to open door.
3.Once the oven has cooled down for 1 HOUR, and the "DOOR
" icon is no longer displayed, the oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a
1.Press CANCEL
.
2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR
" icon is no longer displayed,the oven door can then be opened.
![]()
![]()
![]()
![]()
During the
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the