Electrolux C67600K 1, 3

The following letters and functions are displayed only with the two in-

duction cooking zones.

1f = Error display

flashes if the cooking zone is activated and

–no pan is on the cooking zone or

–unsuitable pots and pans are used

p = Power function

lights up when the Power function is activated.

The Power function supplies extra-high heating capacity. It can be acti-

vated for the front left cooking zone.

1Cooking Zone Safety Cut-out

If one of the cooking zones is not switched off after a certain time or if

the heat setting is not changed, the corresponding cooking zone

switches itself off automatically.

h appears in the ring display for all rings that are switched on, and _

after they have cooled down.

The rings are switched off at:

3If one or more cooking zones switch off before the times indicated see

section “What to do if …”.

To cancel the activated safety cut-out the appliance must be switched

off and then on again using the ON/OFF I sensor field. After this the

cooking zones are again ready for use.

Liquid that boils over onto the control panel causes all cooking zones to

switch off immediately.

If you place a wet cloth on the control panel it has the same effect. In

both cases the appliance has to be switched on again using the mains

switch I after removing the liquid or cloth.

•Heat setting 1 - 2 after 6 hours

•Heat setting 3 - 4 after 5 hours

•Heat setting 5 after 4 hours

•Heat setting 6 - 9 after 1.5 hours