Manuals / Electrolux / Kitchen Appliance / Microwave Oven

Electrolux D2160-1 operating instructions Grill And Oven Furniture, Telescopic Runners

Models: D2160-1

1 40

Download 40 pages 25.81 Kb

Page 6

GRILL AND OVEN FURNITURE

GRILL AND OVEN FURNITURE

The following items of grill and oven furniture have been supplied with the appliance. If you require replacements of any of the items listed below, please contact your local Service Force Centre quoting the relevant part number.

1 grill pan

(311409401)

1 grill pan handle

(311468100)

Note

If you require an additional handle for your grill pan, this can be ordered from your local Service Force Centre by quoting part number 311479800\6

1 grill pan grid

(311419801)

1 meat tin

(311409401)

1 cranked shelf (for grilling and second oven cooking only)

2 straight shelves (for main oven cooking)

Telescopic Runners

Your appliance may be fitted with telescopic runners in the grill and main oven.

To fit the shelf into the telescopic runner,

1.Ensure the telescopic runners are pushed back into the oven cavity before fitting the shelf.

2.Holding the front edge of the shelf with both hands, place the rear shelf forms over the telescopic runners.

3.Slide the shelf into position, lifting slightly at the front so that the shelf locates into the retaining hooks.

To remove, raise the front edge and withdraw the shelf.

FORM

RETAINING

HOOK

6

Image 6

Electrolux D2160-1 operating instructions Grill And Oven Furniture, Telescopic Runners

Contents

COMPETENCE D2160-1 Built-in Electric Fanned Double Oven Operating InstructionsCLEANING AND MAINTENANCE INSTALLATIONCHILD SAFETY SERVICEFOR THE USER CONTENTSFOR THE INSTALLER Choice Of Electrical ConnectionDESCRIPTION OF THE OVEN Build-in electric fanned double ovenThe Control Panel Control Panel Indicator NeonsGETTING TO KNOW YOUR OVEN The Cooling Fan for the ControlsGRILL AND OVEN FURNITURE Telescopic RunnersRating plate BEFORE USING THE OVEN FOR THE FIRST TIMEWhen First Switching on Preparing to use your oven2. HOW TO SET THE COUNTDOWN ELECTRONIC TIMER1. HOW TO SET THE TIME OF DAY KEY A COOK TIME B END TIME C COUNTDOWN D TIME E DECREASE CONTROLTO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROLA TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B TO SET THE TIMER TO SWITCH OFF ONLY l6. THINGS TO NOTE 4. TO CANCEL AN AUTOMATIC PROGRAMME5. TO RETURN THE APPLIANCE TO MANUAL 7. AUTOMATIC COOKINGTHE DUAL GRILL USING THE GRILLUSING THE TELESCOPIC RUNNERS THE GRILL DOOR MUST BE LEFTTHE GRILL PAN AND HANDLE HINTS AND TIPSGRILLING CHART TO FIT THE SECOND OVEN SHELF USING THE SECOND OVENTHE SECOND OVEN THINGS TO NOTEHINTS AND TIPS l position 3 should be reserved for grilling onlyTHE MAIN FAN OVEN COOKING TEMPERATURESUSING THE FAN OVEN PREHEATINGUSING THE TELESCOPIC RUNNERS where fittedHINTS AND TIPS TEMP COOKTIMEmCOOKING ROASTING CHART ROASTING CHARTTHINGS TO NOTE USING DEFROST FEATUREDEFROSTING HINTS AND TIPSAlways cook thoroughly immediately after thawing l cooledHELPFUL HINTS WHEN BUYING AND PREPARING FOOD CLEANING THE OUTSIDE OF THE OVEN CARE AND CLEANINGCLEANING MATERIALS CLEANING THE GOLD HANDLES Model D2160-1G onlyTO CLEAN THE INNER GLASS DOOR PANELS CLEANING INSIDE THE OVENSCLEANING THE DOOR GLASS TO REMOVE THE INNER GLASSCLEANING THE GRILL AND OVEN FURNITURE TO REPLACE THE INNER GLASS PANELREPLACING AN OVEN LIGHT BULB The second oven works but the grill does not The timer does not work SOMETHING NOT WORKINGPROBLEM The grill, ovens and timer do not work The indicator neons are not working correctlyThe oven temperature is too high or low The oven light fails to illuminateThe oven fan is noisy SERVICE AND SPARE PARTS CUSTOMER CARE DEPARTMENT0870 5 GUARANTEE CONDITIONS Standard guarantee conditionsEuropean Guarantee INSTALLATION INSTRUCTIONS TECHNICAL DETAILSWARNINGS CHOICE OF ELECTRICAL CONNECTIONTHINGS TO NOTE NOTE HOUSE CIRCUITPREPARING CABINET FOR FITTING OF OVEN Do not lift the appliance by the handlesthrough CABINET605075m06DIMENSIONSi0mnmaxin 0minCross section cabinetMAKING THE ELECTRICAL CONNECTIONS HOW TO FINISH UNPACKINGTOOLS REQUIRED PREPARING CABLEFirst remove retaining screw with pozidrive screwdriver. See Fig TO REMOVE COVER OF MAINS TERMINALFig.4 Prise cover loose using screwdriver in position Fig.5 Lift cover and remove screw from cable clamp See Fig Fig.6CHECKING ELECTRICAL CONNECTIONS CONNECTING TO MAINS TERMINALCONNECTING TO A HOB OR COOKER POINT NOTE HOUSE CIRCUITFITTING INTO THE CABINET Warning Do not attempt to lift this appliance by the handlesN O T E S AEG DOMESTIC APPLIANCES 55 - 77 HIGH STREET SLOUGH BERKSHIRE SL1 1DZ Part Number311568109IMPORTANT NOTICE