Electrolux D2160-1 Care And Cleaning, Cleaning Materials, Cleaning The Outside Of The Oven

Models: D2160-1

1 40
Download 40 pages 25.81 Kb
Page 24
Image 24
CARE AND CLEANING

CARE AND CLEANING

BEFORE CLEANING THE OVEN ALWAYS ALLOW THE COOLING FAN TO COOL THE OVEN DOWN BEFORE SWITCHING OFF THE ELECTRICITY SUPPLY.

CLEANING MATERIALS

Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided as damage will occur.

CLEANING THE OUTSIDE OF THE OVEN

Regularly wipe over the control panel, oven doors and handles using a soft cloth and hot soapy water. To prevent streaking finish with a soft cloth.

Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard.

Under no circumstances should the door assembly be detached from the product for cleaning. Please refer to the cleaning instructions.

Model D2160-1M only

Stainless steel cream cleaners can be abrasive and should be avoided as damage to the surface finish can occur. Washing up liquid and hot water or liquid stainless steel cleaners such as Homecare Stainless Steel Cleanser and Polish may be used to remove fingermarks.

CLEANING THE GOLD HANDLES (Model D2160-1G only)

It is strongly recommended that only hot water to which a little washing up liquid has been added and a soft cloth is used for cleaning the gold handles.

ANY OTHER CLEANING MATERIALS WILL DULL THE GOLD PLATED FINISH.

REMOVING AND REPLACING

WIREWORK SIDE RUNNERS

Remove all shelves and furniture from the oven. If fitted ensure the telescopic runners are pushed back into place in the oven cavity. Hold the bottom of the wirework runners and draw the runners towards the centre of the oven. Unhook from the top and remove.

The telescopic runners should be dried carefully after washing in hot water to which washing up liquid has been added. lf heavily soiled mild abrasives may be used.

To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.

BRACKET

CAVITY CENTRE

Ensure the wirework runners are firmly in position before replacing the oven shelves.

24

Page 24
Image 24
Electrolux Care And Cleaning, Cleaning Materials, Cleaning The Outside Of The Oven, Model D2160-1M only