TO REPLACE THE INNER GLASS PANEL
1.Holding the glass panel in your right hand fully open the oven door with your left.
2.Gently ease and push the glass into the location points under the handle before lowering and sliding the glass into position under the hinge location points at the rear.
Ensure the glass is properly located.
Do not attempt to use the oven without the glass being in place.
CLEANING THE GRILL AND OVEN FURNITURE
All removable parts, except the grill pan handle can be washed in the dishwasher. Alternatively soak them in hot soapy water if heavily soiled. They will then clean more easily.
The grill pan, meat tin, trivet and grill deflector may be cleaned using a soap impregnated steel wool pad. The grill pan grid and oven shelves should be cleaned using hot soapy water. Soaking first will make cleaning easier.
REPLACING AN OVEN LIGHT BULB
The type of bulb required is a 300C 25 watt small Edison Screw.
(Available through AEG Service Centres).
Disconnect the cooker from the electricity supply before replacing the bulb.
1.Make sure the cooker is cool before replacing the bulb.
2.Open the oven door and remove the shelves.
3.Pull the glass bulb cover towards you and then pull it off. If necessary, use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.Unscrew the bulb by turning it to the left.
5.Fit a new bulb and then replace the glass bulb cover.
6.Replace the oven shelves.
7.Restore the electricity supply and reset the time of day.
25
