Site Preparation

7

 

 

Preparing the Site

IMPORTANT

It is extremely important that the unit is level. If it is not level, the ice mold will not fill evenly. This can cause a reduction in ice rate, uneven sized cubes or water spilling into the storage area which will cause the ice in the bin to melt pre- maturely. Remember that floors near drains have a tendency to slope towards the drain.

1Position the unit on a flat, level surface, capable of supporting the entire weight of the unit. Remember that the unit will be significantly heavier once it is fully loaded.

2The surrounding air temperature must be at least 50°F (10°C) but must not exceed 110°F (43°C).

3The unit must not be located near heat- generating equipment or in direct sunlight.

DANGER

ELECTROCUTION HAZARD!

Electrical Grounding Required. This appliance is equipped with a three prong (grounding) polarized plug for your protection against possible shock hazards.

NEVER remove the round grounding prong from the plug.

NEVER use a two-prong grounding adapter.

NEVER use an extension cord to connect power to the unit.

Where a two-prong wall receptacle is encountered or a longer power cord is required, contact a qualified electrician to have it replaced in accordance with applicable electrical codes.

4The unit must be located to allow clearance for water, drain and electrical connections in the rear of the ice maker.

5Connect the unit to a grounded and polarized 115 VAC, 60 Hz, 15 A circuit (normal household current).

6Avoid connecting the unit to a Ground Fault Interruptor (GFI). GFIs are prone to nuisance tripping which will cause the unit to shut down. GFIs are generally not used on circuits which power equipment that must run unattended for long periods of time.

7The unit must be installed according to your local codes and ordinances.

NOTE

The door of the unit may be mounted on either side of the cabinet (see REVERSING THE DOOR). All units require zero clearance when installed flush with a cabinet or wall (see Figure 2). Electrolux stainless steel models require

a minimum 2-3/4 inch handle clearance when installed against a wall or cabinet that extends beyond the front edge of the unit (see Figure 3).

 

CABINET

 

OR WALL

DOOR

 

SWING

0"

 

 

CLEARANCE

Figure 2

NEEDED

 

2 - 3/4”

Figure 3

8Position the unit to allow free air flow through the front grille (see Figure 4).

9Wipe out inside of unit with a damp cloth.

EXHAUST

Figure 4

INTAKE

 

 

Page 7
Image 7
Electrolux 241927600, EI15IM55GS manual Site Preparation, Preparing the Site

EI15IM55GS, 241927600 specifications

The Electrolux 241927600, also known as the EI15IM55GS, is a remarkable ice maker that seamlessly blends functionality with convenience. Designed to cater to the needs of modern households and busy lifestyles, this appliance stands out for its impressive array of features and technologies that prioritize performance and user experience.

One of the main features of the EI15IM55GS is its impressive ice production capacity. With the ability to produce up to 28 pounds of clear ice per day, this unit ensures that you will never run out of ice during gatherings, parties, or even regular family use. The clear ice it produces not only looks great but also melts slowly, making it perfect for cocktails, soft drinks, and any beverage of your choice.

This ice maker boasts a compact design, which allows it to fit easily on countertops or in areas where space is limited. Its sleek stainless steel finish adds a touch of elegance, enabling it to blend seamlessly with various kitchen styles. The user-friendly controls and digital display make it easy to operate, allowing you to select the size of your ice cubes according to your preferences.

The EI15IM55GS is equipped with advanced technologies that enhance its performance and energy efficiency. With a built-in water filtration system, it helps to ensure that the ice produced is clean and free from impurities. This system not only improves the taste of the ice but also extends the lifespan of the appliance by minimizing scale build-up.

Additionally, this ice maker features an automatic shut-off function that activates when the ice bin is full. This feature not only saves energy but also prevents overflow, ensuring a hassle-free experience. The quiet operation of the EI15IM55GS adds to its appeal, allowing you to enjoy its benefits without any disruptive noise.

In conclusion, the Electrolux 241927600, EI15IM55GS, is an ideal solution for anyone looking to enhance their beverage experience. Its high production capacity, advanced filtration technology, and compact design make it a highly efficient addition to any kitchen or bar area. With its elegant appearance and user-friendly features, this ice maker is sure to provide convenience and satisfaction for years to come. Investing in the EI15IM55GS means you are choosing reliability, quality, and innovation in your home.