![](/images/new-backgrounds/1041198/4119811x1.webp)
6electrolux
SETTING THE TIME
The oven only operates after time set.
When you connect the appliance to the electrical supply or in case of a power cut, the Time function indicator flashes automat- ically.
To set the current time use or
button. After approximately 5 seconds, the flashing stops and the display shows the time of day set.
You can only change the Time of day
if :
•the
•none of the clock functions Duration
or End
is set
•no oven function is set.
Preheat the two ovens. Heat up one oven at a time.
PRE-HEATING
1.Set function and maximum temper- ature.
2.Let the appliance operate without the food for approximately 1 hour.
3.Set function and maximum temper- ature.
4.Let the appliance operate without the food for approximately 10 minutes.
5.Set function and maximum temper- ature.
6.Let the appliance operate without the food for approximately 10 minutes.
This is to burn off the residue in the appli- ance. The accessories can become more hot than usually. When you
HOB - DAILY USE
Warning! Refer to "Safety information" chapter.
CONTROL PANEL LAYOUT
1 |
|
|
| 2 |
| 3 |
| 4 |
| 5 |
|
|
| 6 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 | 9 | 8 | 7 |
Use the sensor fields to operate the appliance.
1
2
3
sensor field
with an indicator
/
a heat setting display
function
locks/unlocks the control panel
increase or decrease heat setting / time
shows the heat setting