graphic), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function:
1. Touch . comes on in the display.
2. Touch again and again until
comes on in the display.
3. Immediately touch again and again
until the necessary heat setting comes
on. After 3 seconds comes on in the
display.
To stop the function touch .
USING THE TIMER
Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
•Selection of the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
•Starting and changing the timer:
touch or of the cooking zone to set
the time (
00
-
99
minutes). When the
indicator of the cooking zone flashes
slower, the time counts down.
•Stopping the timer: select the cooking
zone with and touch to switch off
the timer. The remaining time counts
backwards to
00
. The indicator of the
cooking zone goes out. You can also
touch and at the same time to
switch off the timer.
•Checking the remaining time: select
the cooking zone with . The indicator
of the cooking zone flashes faster. Dis-
play shows the remaining time.
When the time elapses, the sound operates
and
00
flashes. The cooking zone switches
off.
•Stopping the sound: touch .
You can use the timer as a minute minder
while cooking zones do not operate. Touch
. Touch or to select the time.
When the time elapses, the sound operates
and
00
flashes
STARTING THE STOP+GO
The function sets all cooking zones that
operate to a keep warm setting.
•Touch to start this function. The
symbol comes on.
•Touch to stop this function. The heat
setting that you set before comes on.
does not stop the timer function.
locks the control bars.
LOCKING / UNLOCKING THE
CONTROL PANEL
You can lock the control panel, but not .
It prevents an accidental change of the heat
setting during a cooking session.
First set the heat setting.
Touch the symbol . The symbol
comes on for 4 seconds.
The Timer still operates.
Touch the symbol to switch off this func-
tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.
The locking / unlocking function locks
or unlocks the oven interface at the
same time.
THE CHILD SAFETY DEVICE
This function prevents an accidental opera-
tion of the hob and oven.
Starting the child safety device
•Start the hob with . Do not set the
heat settings.
•Touch for 4 seconds. Acoustic signal
appears. The symbol comes on the
hob and the symbol "SAFE"on the oven
display.
•Stop the hob with .
Switching off the child safety device
•Start the hob with . Do not set the
heat settings. Touch for 4 seconds.
Acoustic signal appears. The symbol
comes on the hob and the symbol
"SAFE" goes out of the oven display.
•Stop the hob with .
The child safety device function locks
the hob and oven at this same time.
RESIDUAL HEAT INDICATOR
The residual heat indicator comes on when
a cooking zone is hot.
8 electrolux