Electrolux EKD60760 Fitting the upper glass in the door, Side rails, Non-stick accessories

28electrolux

2

1

Fitting the upper glass in the door

1.Insert the upper glass diagonally from above into the glass retainer on the han- dle side (1).

2.Lower the glass plate. Lay the pane against spring pressure on the handle side in front of the retaining profile on the lower edge of the door and push it under the retaining profile (2). The glass pane must be firmly in position!

2

1

Wash the accessories thoroughly in hot wa- ter and washing-up liquid before using them for the first time.

•Use tools made of plastic or wood instead of metal, which can damage the plate.

•Remember that pots and pans with rough surfaces can damage the accessories.

•Clean the accessories with a soft sponge or a dish-brush in hot water, and a little washing-up liquid. Never use the dish- washer.

•Never use wire wool or sharp objects when cleaning.

Side rails

It is possible to remove the side rails on both the right and left side walls to make it easier to clean the side walls. To facilitate the re- moval of dirt an fat, they can be soaked in water with washing up liquid. Wash by hand. Note! Do not use the dishwasher. This removes all the fat and impairs their function.

Removing the side rails

Accessories

Clean the accessories

Wash the shelves, dripping pan, etc. in hot water and washing-up liquid. Rinse and dry.

Non-stick accessories

These accessories have a dirt-repellent coat- ing and a long life if they are treated correctly

Bright spots in the coating do not mean that the surface is damaged.

Warning! Do not place non-stick accessories on a hot ceramic glass plate since this can damage them. The accessories tolerate a temperature of up to 250°C. Never heat them without food or dough.

First pull the rail away from the oven wall (1) and then disengage to the rear (2).

2

1

Replacing the side rails

Important! Important! The rounded ends of the guides must point to the front!