Electrolux EKD60760 Re-fit the glass cover, Take out the side rails on the left, Oven lighting

electrolux 29

To insert the rail first engage again at the back (1) and then insert in the front and press into place (2).

1

2

1.Take off the glass cover by turning it anti- clockwise and clean it.

2.If necessary:

Replace with oven lamp, 25 Watt, 230 V, 300 °C heat-resistant.

3.Re-fit the glass cover.

Replacing the side oven light bulb/ Cleaning the glass cover

1. Take out the side rails on the left.

Oven lighting

Warning! Risk of electric shock! Before replacing the oven light bulb:

–Switch oven off.

–Make sure that the cooker is disconnected from the power supply.

–For cookers with a cable, pull out the plug.

–For other cookers, disconnect the power supply by using the universal pole switch.

To protect the oven light bulb and the glass cover, lay a cloth on the floor of the oven.

Changing oven light bulb/cleaning glass cover

2.Remove and clean the glass cover with the help of a small, blunt object (e.g. tea- spoon).

3.If necessary: Replace with new bulb with an E14 base, marked 230-240V, 25W and 300°C.

Order the replacement lamp from your local service centre (see section "Service/ Customer Service").

Always touch the halogen lamp using a cloth to avoid oil burning.