16electrolux
B
5.Hold the glass panels on their upper side and one after the other pull them up and out of their retainers.
2.Hold the door strip (B) on both sides, align it with the inner edge of the door and press the door strip (B) into the upper edge of the door.
B
On the open side of the door strip (B) there is a guide bar (C). This must be pressed between the outer side of the door and the corner (D). The seal (E) must audibly click into place.
Cleaning the glass door panels |
|
| |
Thoroughly clean the glass door panels using |
|
| |
a solution of water and |
|
| |
Then dry them carefully. | C | D | |
Replacing the glass door panels | |||
|
| ||
1. Slide the glass door panels one after the |
|
| |
other into the retainers from above at an |
|
| |
angle and then lower the panels. |
| E |
The two smaller panels should be inser- ted first, then the larger panel.
3. Open the door as far as it will go.