Carbon filter's function:
The
The functions of the water dispenser
The locking function:
The locking function is activated by the production plant.
For temporary unlocking:
Keep the button (I) or (J) pressed in for about three seconds until the yellow indicator lamp (H) goes out. The locking function is
For permanent unlocking:
Keep the buttons (I) and (J) pressed in at the same time for about three seconds. The button (I) or (J) lights up to indicate unlocking.
To activate the locking function:
Keep the buttons (I) and (J) pressed in at the same time for about three seconds. Activation is indicated by the yellow indicator lamp (H) lighting up.
H | I | M |
L | N | J | K |
Selecting and obtaining water:
Before obtaining water, selection is carried out either by pressing the button for carbonated water (I) or the button for ordinary water (J). The actual choice is indicated by the button concerned lighting up. The selection of water can be changed while the water is running.
Water i s obtai ned by pressing a glass or other con- tainer against the opening (M). Stop the water flow
by moving the glass or container downwards away from the opening (M). Any water that drips or is spilled is collected in the drip bowl below the water dispenser. When carbonated water is being obtained, there is a slight afterflow when the glass is removed. The drip bowl can be detached and emptied when necessary.
Lighting:
The wat er dispenser lighting (N) goes on automat i- cally when water is obtained.
For continuous lighting:
1.Make sure that the water dispenser is unlocked.
2.Then hold the button for ordinary water (J) pressed in for about three seconds until the lighting goes on.
The lighting then goes on with about 50 % of its full intensity.
To switch off the lighting:
1.Ensure that the water dispenser is unlocked.
2.Then hold the button for ordinary water (J) pressed in for about three seconds until the lighting goes out.
Electrolux
6
