Cleaning
Wash the inside of the appliance using lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water).
Do not use soap or detergent as the smell may linger. Dry thoroughly.
Connecting the water hose.
Remove the transport protector from the valve connector, see the illustration.
Connect the water hose supplied with the hose fitting to the refrigerator water valve, which is located in a box behind the refrigerator. Place the hose in the desired direction and then tighten the connecting nut properly to prevent leakage. The nut is only to be tightened by hand. The water hose must not be cracked, squeezed or be in tight bends. The hose is finally to be fixed with the aid of the securing strip supplied. The water coupling is then connected to a water tap with an external 3/4 inch thread. This work is to be carried out by a skilled plumbing installation technician. The refrigerator is to be connected with a
If you require a longer water hose than that supplied, then a
Before the refrigerator is taken into use in its final location, ensure that the water connection has been correctly carried out, that there is no leakage at the connection to the refrigerator water valve or to the water tap, and that the four spacers are properly in position, see the illustration.
Installation of carbon filter
On delivery the carbon filter is placed in a plastic bag to secure the length of life of the carbon filter. The filter should be placed behind the grill before the appliance is turned on.
Open the grill and mount the carbon filter.
The cover can be opened by simultaneously pressing the lever on the right of grill (1) and turning the cover outward (2). The carbon filter is then mounted in the slot found in the back of the cover.
The filter should be handled carefully so fragments don't loosen from the surface.
| 1 |
2 | 3 |
Electrolux
14
