Electrolux ESII important safety instructions Oven Control Styles or 2 - Self Cleaning Oven

Oven Control Styles 1

or 2 - Self Cleaning Oven

To Start the Self-Clean Cycle - Control Style 1

The oven is programmed to run a 3 hour self-clean cycle.

1.Be sure the oven door is closed.

2.Turn Temperature Control Knob to CLEAN.

3.Push _.

4.If the door is left open, the "LOCK" indicator light will flash, but the lock

motor and clean cycle will not start. As soon as the controls are set and the

door is closed, the motor driven lock will begin to close automatically and

the "LOCK" indicator light will flash. DO NOT open the door while the light

is flashing (it takes about 1 5 seconds for the lock to close).

When the Self-Clean Cycle is Completed (Control Style 1)

1.The "LOCK" indicator light will continue to glow.

2.Once the oven has cooled down for about l HOURandthe"LOCK"indicator

light has gone completely out (and is not flashing), the oven door can be opened.

Note: If the oven is set to bake or broil,

and then the Temperature Control Knob is set to CLEAN, it will not start the

clean cycle until STARTis pressed again.

Use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven

door open. This can damage the

automatic door locking system. Use caution when opening the door after

the self-cleaning cycle is completed. The oven may still be VERY HOT.

To Start the Self-Clean Cycle - Control Style 2

The oven can be programmed to run a 2 or 3 hour self-clean cycle. We

recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

1.Be sure the oven door is closed.

2.Turn Temperature Control Knob to CLEAN.

3.	Push _'-s_RT-_.		"3:00"		will	appear	in the	display.	(The oven	will
	automatically	program		a 3	hour	clean cycle.)
4.	If you want	a 2	hour	clean	cycle, press		_.	"2:00" will	appear in	the
	display.

5.If the door is left open, the"LOCK" indicator light will flash and "dr" will glow in the display, but the lock motor and clean cycle will not start. As soon as the controls are set and the door is closed, the motor driven lock will begin

to close automatically and the "LOCK" indicator light will flash. "CLn" will appear and remain in the display until the cleaning cycle is completed or cancelled. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.	Press_	at anytime	during the self-clean	cycleto review remaining
	cleaning	time.

When the Self-Clean Cycle is Completed (Control Style 2)

1.The time of day will appear in the display window and the "LOCK" indicator light will continue to glow.

2.Once the oven has cooled down for about l HOURandthe"LOCK"indicator light has gone completely out (and is not flashing), the oven door can be opened.

Stopping or Interrupting a Self-Cleaning Cycle ( Control Style 1 or 2)

If it becomes necessaryto stop or interrupt a self-cleaning cycle due to excessive smoke or fire:

1.Turn Temperature Control Knob to OFF.

2.Once the oven has cooled down for about l HOURandthe"LOCK"indicator

light has gone completely out (and is not flashing), the oven door can be opened.

3.Correct the condition which caused the smoking.

4.Restart the self-cleaning cycle once all conditions have been corrected.

13