Select and start a washing programme
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate
2.Check that the water tap is opened
3.Close the dishwasher’s door.
4.Turn the programme knob until the programme marker corresponds with the desired programme (see "Washing programmes" chart).
●The On/Off indicator light illuminates.
●The indicator lights of the phases foreseen for the programme start flashing.
5.Press the start/cancel button, the programme starts automatically and the start/cancel indicator light illuminates.
●As soon as the programme starts, the phase indicator lights turn off except for the indicator light for the phase in progress which will remain lit with a static light.
daily use electrolux 23
During the running of the programme, it is not possible to change the selection made by turning the programme knob in correspondence of another programme or the Off position.
If you want to change the running programme you must cancel the selection made (see "Cancel a washing programme in progress").
Setting and starting the programme with "delay start"
●Allows the start of the programme to be delayed by 3 hours.
1.After having selected the washing programme, press the delay start button.
●The corresponding indicator light illuminates.
2.Press the start/cancel button, the countdown of the delay start begins automatically.
●The phase indicator lights turn off.
●The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.
●Once the delay start has elapsed the washing programme will start automatically, the delay start indicator light turns off while the indicator light of the phase in progress illuminates.
