26electrolux daily use
Cancelling the "delay start"
To cancel a delay start in progress you have to reset the dishwasher.
Simultaneously press and hold the two programme buttons positioned over the word Cancel , until all the programme button lights will illuminate.
Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again.
End of the washing programme
●The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.
The dishwasher’s drying system is provided with a device that allows air to circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets.
Once the washing programme has ended this device operates
intermittently for other 20 minutes, as long as the dishwasher is switched on.
If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.
●Open the dishwasher door.
●The indicator light of the programme just ended will remain on.
1.Switch off the dishwasher by pressing the On/Off button.
2.Leave the dishwasher door ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
Unloading the dishwasher
●Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.
●Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
●Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.