electrolux 13
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results. Although the maintenance is very low with these filters, make a check at intervals and if necessary, clean them.
1.Turn the filter (A) counterclockwise and remove it out from filter (B).
B
A
2.Filter (A) has two parts. To disassemble the filter, pull them apart.
3.Fully clean the parts with water.
4.Put the two parts of the filter (A) togeth- er and push. Make sure that they en- gage correctly in each other.
5.Remove the filter (B).
6.Fully clean the filter (B) with water.
7.Put the filter (B) to its initial position. Make sure that it engages correctly in the two guides (C).
C
8.Put the filter (A) into position in filter (B). Turn the filter (A) clockwise until it locks.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clog- ged, remove remaining parts of soil with a thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance and control panel with a moist soft cloth. Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads or solvents (acetone).
WHAT TO DO IF…
The start of the appliance does not occur or it stops during operation.
First try to find a solution to the problem (re- fer to the table). If not, contact the service centre.
With some malfunctions, the display shows an alarm code:
•
- The appliance does not fill with wa- ter
•
- The appliance does not drain the water
•
- The
Warning! Deactivate the appliance before you do the checks.
