14 electrolux |
|
|
|
|
|
Malfunction |
| Possible cause |
The appliance does not fill with |
| The water tap is blocked or |
water. |
| there is limescale on it. |
|
| The water pressure is too low. |
|
|
|
|
| The water tap is closed. |
|
| The filter in the water inlet hose |
|
| is blocked. |
|
| The connection of the water in- |
|
| let hose is not correct. |
|
| The water inlet hose is dam- |
|
| aged. |
The appliance does not drain |
| There is a blockage in the sink |
the water. |
| spigot. |
|
| The connection of the water |
|
| drain hose is not correct. |
|
| The water drain hose is dam- |
|
| aged. |
The |
|
|
|
|
|
The start of the washing pro- |
| The appliance door is open. |
gramme does not occur. |
|
|
|
| The mains plug is not connec- |
|
| ted in the mains socket. |
|
| The fuse in the fuse box is |
|
| damaged. |
|
| The delay start is set. |
|
|
|
Possible solution
Clean the water tap.
Contact your local water au- thority.
Open the water tap.
Clean the filter.
Make sure that the connection is correct.
Make sure that the water inlet hose has no damages.
Clean the sink spigot.
Make sure that the connection is correct.
Make sure that the water drain hose has no damages.
Close the water tap and con- tact the service centre.
Close the appliance door.
Connect the mains plug.
Replace the fuse.
•Cancel the delay start.
•When the countdown is completed, the washing pro- gramme starts automatically.
After the check, activate the appliance. The | Record this information: |
programme continues from the point of in- | – Model |
terruption. | (MOD.) |
If the malfunction occurs again, contact the | .... |
service centre. | – Product number |
If the display shows other alarm codes, | (PNC) |
contact the service centre. | – Serial number |
The necessary information for the service | (S.N.) |
centre is on the rating plate. |
|
The washing results and drying results are not satisfactory
Problem
The dishes are not clean.
Possible cause
The washing programme was not applicable for the type of load and soil.
You did not put the items cor- rectly in the baskets, water did not touch all surfaces.
Possible solution
Make sure that the washing programme is applicable for the type of load and soil.
Put the items correctly in the baskets.