or make a hole in the bottom of the appli- ance.
•Do not fill the rinse aid dispenser with other products than the rinse aid, (dish- washer cleaning agent, liquid detergent). This can cause damage to the appliance.
•Make sure that the spray arms can move freely before you start a washing pro- gramme.
•The appliance can release hot steam if you open the door while a washing pro- gramme operates. There is a risk of skin burns.
•Do not remove the dishes from the appli- ance until the washing programme is completed.
Care and cleaning
•Before you clean the appliance, deacti- vate it and disconnect the mains plug from the mains socket.
•Do not use flammable products or prod- ucts that can cause corrosion.
•Do not use the appliance without the fil- ters. Make sure that the installation of the filters is correct. An incorrect installation causes unsatisfactory washing results and damage to the appliance.
•Do not use spray water or steam to clean the appliance. Risk of electrical shock and damage to the appliance.
Installation
•Make sure that the appliance is not dam- aged. Do not install or connect a dam- aged appliance, contact the supplier.
•Remove all packaging before you install and use the appliance.
•Only a qualified person must do the elec- trical connection, the plumbing and the installation of the appliance. This to pre- vent the risks of structural damage or in- jury.
•Make sure that the mains plug is discon- nected from the mains socket during in- stallation.
•Do not drill into the sides of the appliance to prevent damage to hydraulic compo- nents and electrical components.
•Important!Obey the instructions in the template supplied with the appliance:
–To install the appliance.
–To assemble the door panel.
electrolux 3
–To connect to the water supply and drain.
•Make sure that the appliance is installed below and adjacent to safe structures.
Frost precautions
•Do not install the appliance where the temperature is less than 0 °C.
•The manufacturer is not responsible for frost damage.
Water connection
•Use new hoses to connect the appliance to the water supply. Do not use used ho- ses.
•Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some minutes, then connect the inlet hose.
•Make sure not to squash or cause dam- age to the water hoses when you install the appliance.
•Make sure that the water couplings are tight to prevent a water leakage.
•The first time you use the appliance, make sure that the hoses do not have water leaks.
•The water inlet hose has a safety valve and a double sheath with an inner mains cable. There is pressure in the water inlet hose only when the water flows. If there is a leak in the water inlet hose, the safety valve interrupts the flow of water.
–Be careful when you connect the water inlet hose:
–Do not put the water inlet hose or the safety valve in water.
–If the water inlet hose or the safety valve are damaged, immediately dis- connect the mains plug from the mains socket.
–Contact the service centre to replace the water inlet hose with safety valve.
Warning! Dangerous voltage.
